Audi A6

C5 - 1997 - 20042.7T 230hp

Engine code
AJK
Gearbox
Manual
Power
230 hp
Torque
310 Nm
Find a dealer

A6 Chiptuning

Select a stage

Stage 1

Power/TorqueDefaultStage 1Difference
Power230 hp250 hp+ 20 hp
Torque310 Nm350 Nm+ 40 Nm

Where to get it

  • TVS Engineering HQ

    Make an appointment for extended diagnostics, installing custom TVS software and a dyno run at our HQ!

Stage 2

Power/TorqueDefaultStage 2Difference
Power230 hp320 hp+ 90 hp
Torque310 Nm470 Nm+ 160 Nm

Where to get it

  • TVS Engineering HQ

    Make an appointment for extended diagnostics, installing custom TVS software and a dyno run at our HQ!

Stage 2+

Power/TorqueDefaultStage 2+Difference
Power230 hp340 hp+ 110 hp
Torque310 Nm500 Nm+ 190 Nm

Recommended modifications

  • High grade quality fuel (at least RON98)

    For Stage 2+ and higher tunes TVS always recommend at least RON98 fuel, but our tunes are available for lower and higher fuel grades as well.

  • Upgraded air intake system

    For Stage 2+ and higher tunes at least an upgraded air intake system and downpipe are required. An upgraded intake air system improves performance over the factory one by increasing the mass air flow through the system and thereby improving power, torque and throttle response.

  • Upgraded downpipe

    For Stage 2+ and higher tunes at least an upgraded air intake system and downpipe are required. A downpipe normally eliminates unnecessary factory restrictions and creates an ideal flow path to maximize exhaust gas flow and thereby improved performance.

Optional features

  • Vehicle Speed Limiter

    TVS is able to adjust or remove the vehicle speed limiter from your vehicle to any desired value.

  • Engine Rev Limiter

    TVS is able to adjust or remove the engine speed limiter from your engine to any desired value.

  • Lambda / O2 delete (decat)

    When installing a decat downpipe it is important to carefully recalibrate the ECU software and optionally disable the function of the second lambda sensor located after the removed catalyst.

Stage 3

Power/TorqueDefaultStage 3Difference
Power230 hp
Torque310 Nm

Recommended modifications

  • High grade quality fuel (at least RON98)

    For Stage 2+ and higher tunes TVS always recommend at least RON98 fuel, but our tunes are available for lower and higher fuel grades as well.

  • Upgraded air intake system

    For Stage 2+ and higher tunes at least an upgraded air intake system and downpipe are required. An upgraded intake air system improves performance over the factory one by increasing the mass air flow through the system and thereby improving power, torque and throttle response.

  • Upgraded downpipe

    For Stage 2+ and higher tunes at least an upgraded air intake system and downpipe are required. A downpipe normally eliminates unnecessary factory restrictions and creates an ideal flow path to maximize exhaust gas flow and thereby improved performance.

  • Upgraded intercooler

    For high performance applications TVS always recommend an upgraded intercooler. In order to decrease charge air temperatures and being capable of supporting power levels far beyond that of the OEM intercooler.

  • Upgraded (catback) exhaust system

    Upgraded catback exhaust systems normally uses larger piping and less restrictions compared to the factory exhaust for increased performance. Especially for high peprformance applications TVS always recommend an upgraded exhaust system.

  • Upgraded turbo- or supercharger kit

    For Stage 3 and higher tunes a decent upgrade turbo- or supercharger kit is required. Due to our knowledge, experience and specialism in calibrating high power applications, TVS is nowadays able to create custom software for almost every turbo- and supercharger upgrade.

Optional features

  • Vehicle Speed Limiter

    TVS is able to adjust or remove the vehicle speed limiter from your vehicle to any desired value.

  • Engine Rev Limiter

    TVS is able to adjust or remove the engine speed limiter from your engine to any desired value.

  • Lambda / O2 delete (decat)

    When installing a decat downpipe it is important to carefully recalibrate the ECU software and optionally disable the function of the second lambda sensor located after the removed catalyst.

  • Upgraded Injector calibration

    TVS is able to recalibrate upgraded injectors properly within the ECU software for high performance vehicles for which factory injectors are not sufficient.

Book appointment